Attributes on the Array Properties panel of Array Manager are
general settings for the array. The attributes apply to all array
members.
|
| Port Numbers (unencrypted connections) | --array-port-unencrypted tcp_port |
- The TCP port number used for unencrypted
connections between client devices and Tarantella
servers.
- Open this port in your firewall to enable connections from users
who have standard connections (connections not using SSL).
- You should restart every Tarantella server in the
array for changes to this attribute to take effect.
|
| Port Numbers (encrypted connections) | --array-port-encrypted tcp_port |
- The TCP port number used for encrypted
connections between client devices and Tarantella
servers.
- Open this port in your firewall to enable connections from users
who have secure (SSL-based) connections (using the Tarantella Security Pack).
- You should restart every Tarantella server in the
array for changes to this attribute to take effect.
|
| Port Numbers (connections between array members) | --array-port-peer tcp_port |
- The TCP port number used for connections between
Tarantella array members.
- These connections are used to replicate information across the
array.
- You should restart every Tarantella server in the
array for changes to this attribute to take effect.
|
| Log Filter | --array-logfilter filter... |
- Which diagnostic messages are logged, and where.
- This attribute contains multiple values, each of the form
component/subcomponent/severity:destination.
- Use the wildcard
* to match multiple
components, subcomponents and severities. On the command line, remember to
quote any filters containing wildcards to stop your shell from expanding them.
- Valid destinations are a filename or the
TFN name of a plug-in log handler.
- On the command line, separate each filter with a
space. Remember to quote any filters that contain wildcards
*, to stop your shell from expanding them.
- File names may include the placeholder
%%PID%%, which is substituted with a process ID.
- On the command line, separate each filter with a
space. In Array Manager, separate each filter with a RETURN.
- For detailed information on setting log filters and viewing log output,
see Using log filters to
troubleshoot problems with the Tarantella server.
- Changes to this attribute take effect immediately.
|
| Enable billing services | --array-billingservices 1 | 0 |
- Whether to enable billing services across the array.
- This may use significant additional disk space on array members.
- If enabled, you can use
tarantella query billing to analyse the
billing logs.
- Changes to this attribute take effect on an array member the
next time the Tarantella server starts.
|
| Enable resource synchronization | --array-resourcesync 1 | 0 |
- Whether to enable replication of resources across the array.
- If enabled, synchronization starts at a time determined in Tuning properties for each array member.
- Changes to this attribute take effect immediately.
|
| Client Drive Mapping: Let users access client drives | --array-cdm 1 | 0 |
- Whether to enable client drive mapping (CDM) across the array.
- If enabled, the Client
Drive Mapping attributes for users, organizational units and
organization objects are used to determine the client drives that
users have access to.
- CDM services use port 139/tcp on the
Tarantella server.
- CDM is only available for Microsoft Windows
2000/2003 application servers with the
Tarantella Enhancement Module
installed.
- If you enable drive mapping, CDM services only become
available when you restart all Tarantella servers in the array.
To manually start CDM services without restarting the array, run
the
tarantella start cdm command
on all members of the array.
- If you disable drive mapping, the CDM processes only stop
when you restart all Tarantella servers in the array.
To manually stop CDM services without restarting the array, run
the
tarantella stop cdm command
on all members of the array.
- Changes to this attribute only take effect for new webtop sessions.
|
| Client Drive Mapping: Use WINS for better performance | --array-cdm-wins 1 | 0 |
- Whether to enable WINS to improve performance of client drive
access. Without WINS, performance may be limited by known problems
with Microsoft Windows networking (which may be fixed by
Windows Service Packs).
- WINS services use port
137/udp on the Tarantella server.
- If each application server providing client drive mapping is on
the same subnet as a Tarantella array member, no
application server configuration is needed. For application
servers that don't share a subnet with any array member,
you need to enable WINS on the application server (Advanced TCP/IP
properties for the network connection) and name any array member as
a WINS server. Be sure to reconfigure the application server if this
array member leaves the array.
- Changes to this attribute take effect on an array member the
next time the Tarantella server starts.
|
| Fallback Drive | --array-cdm-fallbackdrive letter_direction |
- For client drives that can't be mapped using the configured
drive letter because that drive letter is already in use, which
drive letter to start searching from and the direction to search.
The first unused drive letter is used to map the client drive.
- Allowed values are of the form
[a-zA-Z][+-], for
example V- to start at drive V and search
alphabetically backwards, or f+ to search forwards from
drive F. Drive letters are case-insensitive.
- Changes to this attribute take effect for new webtop sessions.
|