Tarantella Administration Guide > Printing > Printing from a Microsoft Windows NT 4 application server

Printing from a Microsoft Windows NT 4 application server

The configuration needed to let users print from a Windows NT 4 application server depends on which of the following Windows protocols you are using:

• Citrix UNIX Integration Services (UIS).
• Windows Terminal Services, or
• WinFrame/MetaFrame.

The configuration required for each of these protocols is described below.

Printing using the Citrix UIS or Windows Terminal Services Windows protocols

To print from an Windows NT 4 application server using either the Citrix UIS or the Windows Terminal Services Windows protocol, you have to configure an LPR-compatible TCP/IP printer on the application server that you want to print from. To do this:

1. Log in to the application server as a Windows administrator or a member of the Administration group.
2. In Windows Control Panel, double-click Network.
3. In the Services tab, click Add to install the Microsoft TCP/IP service.
4. Run the Add Printer Wizard on the application server to configure the new printer.
5. When prompted, click Local Printer. Clear the Automatically Detect My Printer box.
6. Click Create A New Port and then click LPR Port.
7. In Name Or Address Of Server Providing lpd, type the full DNS name of the primary Tarantella server in the array.
8. In Name Of Printer Or Print Queue On That Server, type tta_printer.
9. When prompted, choose the printer model and manufacturer that most closely matches the client device's default printer. If there's no close match, choose a PostScript printer.
10. When prompted as to whether the printer will be shared with other network users, click Do Not Share This Printer.

Note The version of Windows Terminal Services supported by NT 4 is not the same as the version supported by Windows 2000/2003 and so it requires the above configuration.

Printing using the WinFrame/MetaFrame Windows protocol

To print from an Windows NT 4 application server using the WinFrame/MetaFrame Windows protocol, you have to configure a Tarantella printer on the UNIX server running the ICA client and on the Windows application server you want to print from. To do this:

1. Configure a Tarantella printer on the UNIX application server that runs the ICA client.
2. Use Tarantella to log in to Windows application server. Use the WinFrame/MetaFrame Windows protocol.
3. Start the Add Printer Wizard.
4. When prompted how the printer should be managed, click Network Printer Server.
5. In the Connect to Printer box, double-click the Client icon.
6. In the Shared Printer list, double-click the printer you want to configure. The name of the printer you need to select has the format ip_address:#printer_name, where ip_address is the IP address of the primary Tarantella server in the array and printer_name is the name of the printer you configured on the UNIX application server.
7. When prompted, choose the printer model and manufacturer that most closely matches the client device's default printer. If there's no close match, choose a PostScript printer.

Limitations when printing from a Windows NT 4 application server

You should note the following limitations of printing from a Windows NT 4 application server:

• no multiple printer support - you can only print to the client device's default printer. It is not possible for users to select a printer. If a user needs to print to a different printer, they have to log out of Tarantella, change their default printer and then log in again.
• print jobs may be deleted - when a print job is transferred from the application server to a Tarantella server, the user's Tarantella name is needed to identify which client device to sent the print job to. With Windows NT 4 there is no direct way to associate print jobs with Tarantella users. If Tarantella cannot identify which user has printed a particular job, the print job is deleted. This might happen, for example, if two users log in to the application server with the same name.
• distributed printing is not available - all print jobs are directed through the primary server in a Tarantella array.

Next steps in configuring Tarantella printing

• Configure another application server:
  • UNIX application server
  • Windows 2000/2003 application server
  • Windows NT 3.51 application server
  • Windows application server using SCO Merge protocol
• Configure the Tarantella server to accept remote print requests.
• Configure printing if you use the Common UNIX Printing System™ (CUPS).
• Configure printing for UNIX clients.
• Configure Tarantella print job conversion.
• Test that printing works. If you have trouble printing, follow the steps in the printing troubleshooter.